Google Sheets :: Apache Camel

URI Format

The GoogleSheets Component uses the following URI format:

        google-sheets://endpoint-prefix/endpoint?[options]

Endpoint prefix can be one of:

spreadsheets
data

GoogleSheetsComponent

The Google Sheets component supports 10 options, which are listed below.

Name	Description	Default	Type
applicationName (common)	Google Sheets application name. Example would be camel-google-sheets/1.0		String
clientId (common)	Client ID of the sheets application		String
configuration (common)	To use the shared configuration		GoogleSheetsConfiguration
bridgeErrorHandler (consumer)	Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions occurred while the consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored.	false	boolean
lazyStartProducer (producer)	Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.	false	boolean
basicPropertyBinding (advanced)	Whether the component should use basic property binding (Camel 2.x) or the newer property binding with additional capabilities	false	boolean
clientFactory (advanced)	To use the GoogleSheetsClientFactory as factory for creating the client. Will by default use BatchGoogleSheetsClientFactory		GoogleSheetsClientFactory
accessToken (security)	OAuth 2 access token. This typically expires after an hour so refreshToken is recommended for long term usage.		String
clientSecret (security)	Client secret of the sheets application		String
refreshToken (security)	OAuth 2 refresh token. Using this, the Google Sheets component can obtain a new accessToken whenever the current one expires - a necessity if the application is long-lived.		String

Name

Description

Default

Type

applicationName (common)

Google Sheets application name. Example would be camel-google-sheets/1.0

String

clientId (common)

Client ID of the sheets application

String

configuration (common)

To use the shared configuration

GoogleSheetsConfiguration

bridgeErrorHandler (consumer)

Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions occurred while the consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored.

false

boolean

lazyStartProducer (producer)

Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.

false

boolean

basicPropertyBinding (advanced)

Whether the component should use basic property binding (Camel 2.x) or the newer property binding with additional capabilities

false

boolean

clientFactory (advanced)

To use the GoogleSheetsClientFactory as factory for creating the client. Will by default use BatchGoogleSheetsClientFactory

GoogleSheetsClientFactory

accessToken (security)

OAuth 2 access token. This typically expires after an hour so refreshToken is recommended for long term usage.

String

clientSecret (security)

Client secret of the sheets application

String

refreshToken (security)

OAuth 2 refresh token. Using this, the Google Sheets component can obtain a new accessToken whenever the current one expires - a necessity if the application is long-lived.

String

The Google Sheets endpoint is configured using URI syntax:

google-sheets:apiName/methodName

with the following path and query parameters:

Path Parameters (2 parameters):

Name	Description	Default	Type
apiName	Required What kind of operation to perform. The value can be one of: SPREADSHEETS, DATA		GoogleSheetsApiName
methodName	Required What sub operation to use for the selected operation. The value can be one of: create, get, update, append, batchUpdate, clear		String

Name

Description

Default

Type

apiName

Required What kind of operation to perform. The value can be one of: SPREADSHEETS, DATA

GoogleSheetsApiName

methodName

Required What sub operation to use for the selected operation. The value can be one of: create, get, update, append, batchUpdate, clear

String

Query Parameters (28 parameters):

Name	Description	Default	Type
applicationName (common)	Google Sheets application name. Example would be camel-google-sheets/1.0		String
clientId (common)	Client ID of the sheets application		String
inBody (common)	Sets the name of a parameter to be passed in the exchange In Body		String
bridgeErrorHandler (consumer)	Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions occurred while the consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored.	false	boolean
sendEmptyMessageWhenIdle (consumer)	If the polling consumer did not poll any files, you can enable this option to send an empty message (no body) instead.	false	boolean
exceptionHandler (consumer)	To let the consumer use a custom ExceptionHandler. Notice if the option bridgeErrorHandler is enabled then this option is not in use. By default the consumer will deal with exceptions, that will be logged at WARN or ERROR level and ignored.		ExceptionHandler
exchangePattern (consumer)	Sets the exchange pattern when the consumer creates an exchange. The value can be one of: InOnly, InOut, InOptionalOut		ExchangePattern
pollStrategy (consumer)	A pluggable org.apache.camel.PollingConsumerPollingStrategy allowing you to provide your custom implementation to control error handling usually occurred during the poll operation before an Exchange have been created and being routed in Camel.		PollingConsumerPollStrategy
lazyStartProducer (producer)	Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.	false	boolean
basicPropertyBinding (advanced)	Whether the endpoint should use basic property binding (Camel 2.x) or the newer property binding with additional capabilities	false	boolean
synchronous (advanced)	Sets whether synchronous processing should be strictly used, or Camel is allowed to use asynchronous processing (if supported).	false	boolean
backoffErrorThreshold (scheduler)	The number of subsequent error polls (failed due some error) that should happen before the backoffMultipler should kick-in.		int
backoffIdleThreshold (scheduler)	The number of subsequent idle polls that should happen before the backoffMultipler should kick-in.		int
backoffMultiplier (scheduler)	To let the scheduled polling consumer backoff if there has been a number of subsequent idles/errors in a row. The multiplier is then the number of polls that will be skipped before the next actual attempt is happening again. When this option is in use then backoffIdleThreshold and/or backoffErrorThreshold must also be configured.		int
delay (scheduler)	Milliseconds before the next poll.	500	long
greedy (scheduler)	If greedy is enabled, then the ScheduledPollConsumer will run immediately again, if the previous run polled 1 or more messages.	false	boolean
initialDelay (scheduler)	Milliseconds before the first poll starts.	1000	long
repeatCount (scheduler)	Specifies a maximum limit of number of fires. So if you set it to 1, the scheduler will only fire once. If you set it to 5, it will only fire five times. A value of zero or negative means fire forever.	0	long
runLoggingLevel (scheduler)	The consumer logs a start/complete log line when it polls. This option allows you to configure the logging level for that. The value can be one of: TRACE, DEBUG, INFO, WARN, ERROR, OFF	TRACE	LoggingLevel
scheduledExecutorService (scheduler)	Allows for configuring a custom/shared thread pool to use for the consumer. By default each consumer has its own single threaded thread pool.		ScheduledExecutorService
scheduler (scheduler)	To use a cron scheduler from either camel-spring or camel-quartz component. The value can be one of: none, spring, quartz	none	String
schedulerProperties (scheduler)	To configure additional properties when using a custom scheduler or any of the Quartz, Spring based scheduler.		Map
startScheduler (scheduler)	Whether the scheduler should be auto started.	true	boolean
timeUnit (scheduler)	Time unit for initialDelay and delay options. The value can be one of: NANOSECONDS, MICROSECONDS, MILLISECONDS, SECONDS, MINUTES, HOURS, DAYS	MILLISECONDS	TimeUnit
useFixedDelay (scheduler)	Controls if fixed delay or fixed rate is used. See ScheduledExecutorService in JDK for details.	true	boolean
accessToken (security)	OAuth 2 access token. This typically expires after an hour so refreshToken is recommended for long term usage.		String
clientSecret (security)	Client secret of the sheets application		String
refreshToken (security)	OAuth 2 refresh token. Using this, the Google Sheets component can obtain a new accessToken whenever the current one expires - a necessity if the application is long-lived.		String

Name

Description

Default

Type

applicationName (common)

Google Sheets application name. Example would be camel-google-sheets/1.0

String

clientId (common)

Client ID of the sheets application

String

inBody (common)

Sets the name of a parameter to be passed in the exchange In Body

String

bridgeErrorHandler (consumer)

Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions occurred while the consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored.

false

boolean

sendEmptyMessageWhenIdle (consumer)

If the polling consumer did not poll any files, you can enable this option to send an empty message (no body) instead.

false

boolean

exceptionHandler (consumer)

To let the consumer use a custom ExceptionHandler. Notice if the option bridgeErrorHandler is enabled then this option is not in use. By default the consumer will deal with exceptions, that will be logged at WARN or ERROR level and ignored.

ExceptionHandler

exchangePattern (consumer)

Sets the exchange pattern when the consumer creates an exchange. The value can be one of: InOnly, InOut, InOptionalOut

ExchangePattern

pollStrategy (consumer)

A pluggable org.apache.camel.PollingConsumerPollingStrategy allowing you to provide your custom implementation to control error handling usually occurred during the poll operation before an Exchange have been created and being routed in Camel.

PollingConsumerPollStrategy

lazyStartProducer (producer)

Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.

false

boolean

basicPropertyBinding (advanced)

Whether the endpoint should use basic property binding (Camel 2.x) or the newer property binding with additional capabilities

false

boolean

synchronous (advanced)

Sets whether synchronous processing should be strictly used, or Camel is allowed to use asynchronous processing (if supported).

false

boolean

backoffErrorThreshold (scheduler)

The number of subsequent error polls (failed due some error) that should happen before the backoffMultipler should kick-in.

int

backoffIdleThreshold (scheduler)

The number of subsequent idle polls that should happen before the backoffMultipler should kick-in.

int

backoffMultiplier (scheduler)

To let the scheduled polling consumer backoff if there has been a number of subsequent idles/errors in a row. The multiplier is then the number of polls that will be skipped before the next actual attempt is happening again. When this option is in use then backoffIdleThreshold and/or backoffErrorThreshold must also be configured.

int

delay (scheduler)

Milliseconds before the next poll.

500

long

greedy (scheduler)

If greedy is enabled, then the ScheduledPollConsumer will run immediately again, if the previous run polled 1 or more messages.

false

boolean

initialDelay (scheduler)

Milliseconds before the first poll starts.

1000

long

repeatCount (scheduler)

Specifies a maximum limit of number of fires. So if you set it to 1, the scheduler will only fire once. If you set it to 5, it will only fire five times. A value of zero or negative means fire forever.

0

long

runLoggingLevel (scheduler)

The consumer logs a start/complete log line when it polls. This option allows you to configure the logging level for that. The value can be one of: TRACE, DEBUG, INFO, WARN, ERROR, OFF

TRACE

LoggingLevel

scheduledExecutorService (scheduler)

Allows for configuring a custom/shared thread pool to use for the consumer. By default each consumer has its own single threaded thread pool.

ScheduledExecutorService

scheduler (scheduler)

To use a cron scheduler from either camel-spring or camel-quartz component. The value can be one of: none, spring, quartz

none

String

schedulerProperties (scheduler)

To configure additional properties when using a custom scheduler or any of the Quartz, Spring based scheduler.

Map

startScheduler (scheduler)

Whether the scheduler should be auto started.

true

boolean

timeUnit (scheduler)

Time unit for initialDelay and delay options. The value can be one of: NANOSECONDS, MICROSECONDS, MILLISECONDS, SECONDS, MINUTES, HOURS, DAYS

MILLISECONDS

TimeUnit

useFixedDelay (scheduler)

Controls if fixed delay or fixed rate is used. See ScheduledExecutorService in JDK for details.

true

boolean

accessToken (security)

OAuth 2 access token. This typically expires after an hour so refreshToken is recommended for long term usage.

String

clientSecret (security)

Client secret of the sheets application

String

refreshToken (security)

OAuth 2 refresh token. Using this, the Google Sheets component can obtain a new accessToken whenever the current one expires - a necessity if the application is long-lived.

String

Producer Endpoints

Producer endpoints can use endpoint prefixes followed by endpoint names and associated options described next. A shorthand alias can be used for some endpoints. The endpoint URI MUST contain a prefix.

Endpoint options that are not mandatory are denoted by []. When there are no mandatory options for an endpoint, one of the set of [] options MUST be provided. Producer endpoints can also use a special option inBody that in turn should contain the name of the endpoint option whose value will be contained in the Camel Exchange In message.

Any of the endpoint options can be provided in either the endpoint URI, or dynamically in a message header. The message header name must be of the format CamelGoogleSheets.<option>. Note that the inBody option overrides message header, i.e. the endpoint option inBody=option would override a CamelGoogleSheets.option header.

For more information on the endpoints and options see API documentation at: https://developers.google.com/sheets/api/reference/rest/

Consumer Endpoints

Any of the producer endpoints can be used as a consumer endpoint. Consumer endpoints can use Scheduled Poll Consumer Options to schedule endpoint invocation. Consumer endpoints that return an array or collection will generate one exchange per element, and their routes will be executed once for each exchange.

Message Headers

Any URI option can be provided in a message header for producer endpoints with a CamelGoogleSheets. prefix.

Message Body

All result message bodies utilize objects provided by the underlying APIs used by the GoogleSheetsComponent. Producer endpoints can specify the option name for incoming message body in the inBody endpoint URI parameter. For endpoints that return an array or collection, a consumer endpoint will map every element to distinct messages.

Spring Boot Auto-Configuration

When using google-sheets with Spring Boot make sure to use the following Maven dependency to have support for auto configuration:

<dependency>
  <groupId>org.apache.camel.springboot</groupId>
  <artifactId>camel-google-sheets-starter</artifactId>
  <version>x.x.x</version>
  <!-- use the same version as your Camel core version -->
</dependency>

The component supports 29 options, which are listed below.

Name	Description	Default	Type
camel.component.google-sheets-stream.access-token	OAuth 2 access token. This typically expires after an hour so refreshToken is recommended for long term usage.		String
camel.component.google-sheets-stream.application-name	Google sheets application name. Example would be camel-google-sheets/1.0		String
camel.component.google-sheets-stream.basic-property-binding	Whether the component should use basic property binding (Camel 2.x) or the newer property binding with additional capabilities	false	Boolean
camel.component.google-sheets-stream.bridge-error-handler	Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions occurred while the consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored.	false	Boolean
camel.component.google-sheets-stream.client-factory	To use the GoogleSheetsClientFactory as factory for creating the client. Will by default use BatchGoogleSheetsClientFactory. The option is a org.apache.camel.component.google.sheets.GoogleSheetsClientFactory type.		String
camel.component.google-sheets-stream.client-id	Client ID of the sheets application		String
camel.component.google-sheets-stream.client-secret	Client secret of the sheets application		String
camel.component.google-sheets-stream.configuration	To use the shared configuration. The option is a org.apache.camel.component.google.sheets.stream.GoogleSheetsStreamConfiguration type.		String
camel.component.google-sheets-stream.enabled	Whether to enable auto configuration of the google-sheets-stream component. This is enabled by default.		Boolean
camel.component.google-sheets-stream.include-grid-data	True if grid data should be returned.	false	Boolean
camel.component.google-sheets-stream.major-dimension	Specifies the major dimension that results should use..	ROWS	String
camel.component.google-sheets-stream.max-results	Specify the maximum number of returned results. This will limit the number of rows in a returned value range data set or the number of returned value ranges in a batch request.	0	Integer
camel.component.google-sheets-stream.range	Specifies the range of rows and columns in a sheet to get data from.		String
camel.component.google-sheets-stream.refresh-token	OAuth 2 refresh token. Using this, the Google Calendar component can obtain a new accessToken whenever the current one expires - a necessity if the application is long-lived.		String
camel.component.google-sheets-stream.scopes	Specifies the level of permissions you want a sheets application to have to a user account. See https://developers.google.com/identity/protocols/googlescopes for more info.		List
camel.component.google-sheets-stream.split-results	True if value range result should be split into rows or columns to process each of them individually. When true each row or column is represented with a separate exchange in batch processing. Otherwise value range object is used as exchange junk size.	false	Boolean
camel.component.google-sheets-stream.spreadsheet-id	Specifies the spreadsheet identifier that is used to identify the target to obtain.		String
camel.component.google-sheets-stream.value-render-option	Determines how values should be rendered in the output.	FORMATTED_VALUE	String
camel.component.google-sheets.access-token	OAuth 2 access token. This typically expires after an hour so refreshToken is recommended for long term usage.		String
camel.component.google-sheets.application-name	Google Sheets application name. Example would be camel-google-sheets/1.0		String
camel.component.google-sheets.basic-property-binding	Whether the component should use basic property binding (Camel 2.x) or the newer property binding with additional capabilities	false	Boolean
camel.component.google-sheets.bridge-error-handler	Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions occurred while the consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored.	false	Boolean
camel.component.google-sheets.client-factory	To use the GoogleSheetsClientFactory as factory for creating the client. Will by default use BatchGoogleSheetsClientFactory. The option is a org.apache.camel.component.google.sheets.GoogleSheetsClientFactory type.		String
camel.component.google-sheets.client-id	Client ID of the sheets application		String
camel.component.google-sheets.client-secret	Client secret of the sheets application		String
camel.component.google-sheets.configuration	To use the shared configuration. The option is a org.apache.camel.component.google.sheets.GoogleSheetsConfiguration type.		String
camel.component.google-sheets.enabled	Whether to enable auto configuration of the google-sheets component. This is enabled by default.		Boolean
camel.component.google-sheets.lazy-start-producer	Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.	false	Boolean
camel.component.google-sheets.refresh-token	OAuth 2 refresh token. Using this, the Google Sheets component can obtain a new accessToken whenever the current one expires - a necessity if the application is long-lived.		String

Name

Description

Default

Type

camel.component.google-sheets-stream.access-token

OAuth 2 access token. This typically expires after an hour so refreshToken is recommended for long term usage.

String

camel.component.google-sheets-stream.application-name

Google sheets application name. Example would be camel-google-sheets/1.0

String

camel.component.google-sheets-stream.basic-property-binding

Whether the component should use basic property binding (Camel 2.x) or the newer property binding with additional capabilities

false

Boolean

camel.component.google-sheets-stream.bridge-error-handler

Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions occurred while the consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored.

false

Boolean

camel.component.google-sheets-stream.client-factory

To use the GoogleSheetsClientFactory as factory for creating the client. Will by default use BatchGoogleSheetsClientFactory. The option is a org.apache.camel.component.google.sheets.GoogleSheetsClientFactory type.

String

camel.component.google-sheets-stream.client-id

Client ID of the sheets application

String

camel.component.google-sheets-stream.client-secret

Client secret of the sheets application

String

camel.component.google-sheets-stream.configuration

To use the shared configuration. The option is a org.apache.camel.component.google.sheets.stream.GoogleSheetsStreamConfiguration type.

String

camel.component.google-sheets-stream.enabled

Whether to enable auto configuration of the google-sheets-stream component. This is enabled by default.

Boolean

camel.component.google-sheets-stream.include-grid-data

True if grid data should be returned.

false

Boolean

camel.component.google-sheets-stream.major-dimension

Specifies the major dimension that results should use..

ROWS

String

camel.component.google-sheets-stream.max-results

Specify the maximum number of returned results. This will limit the number of rows in a returned value range data set or the number of returned value ranges in a batch request.

0

Integer

camel.component.google-sheets-stream.range

Specifies the range of rows and columns in a sheet to get data from.

String

camel.component.google-sheets-stream.refresh-token

OAuth 2 refresh token. Using this, the Google Calendar component can obtain a new accessToken whenever the current one expires - a necessity if the application is long-lived.

String

camel.component.google-sheets-stream.scopes

Specifies the level of permissions you want a sheets application to have to a user account. See https://developers.google.com/identity/protocols/googlescopes for more info.

List

camel.component.google-sheets-stream.split-results

True if value range result should be split into rows or columns to process each of them individually. When true each row or column is represented with a separate exchange in batch processing. Otherwise value range object is used as exchange junk size.

false

Boolean

camel.component.google-sheets-stream.spreadsheet-id

Specifies the spreadsheet identifier that is used to identify the target to obtain.

String

camel.component.google-sheets-stream.value-render-option

Determines how values should be rendered in the output.

FORMATTED_VALUE

String

camel.component.google-sheets.access-token

OAuth 2 access token. This typically expires after an hour so refreshToken is recommended for long term usage.

String

camel.component.google-sheets.application-name

Google Sheets application name. Example would be camel-google-sheets/1.0

String

camel.component.google-sheets.basic-property-binding

Whether the component should use basic property binding (Camel 2.x) or the newer property binding with additional capabilities

false

Boolean

camel.component.google-sheets.bridge-error-handler

Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions occurred while the consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored.

false

Boolean

camel.component.google-sheets.client-factory

To use the GoogleSheetsClientFactory as factory for creating the client. Will by default use BatchGoogleSheetsClientFactory. The option is a org.apache.camel.component.google.sheets.GoogleSheetsClientFactory type.

String

camel.component.google-sheets.client-id

Client ID of the sheets application

String

camel.component.google-sheets.client-secret

Client secret of the sheets application

String

camel.component.google-sheets.configuration

To use the shared configuration. The option is a org.apache.camel.component.google.sheets.GoogleSheetsConfiguration type.

String

camel.component.google-sheets.enabled

Whether to enable auto configuration of the google-sheets component. This is enabled by default.

Boolean

camel.component.google-sheets.lazy-start-producer

Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.

false

Boolean

camel.component.google-sheets.refresh-token

OAuth 2 refresh token. Using this, the Google Sheets component can obtain a new accessToken whenever the current one expires - a necessity if the application is long-lived.

String