AWS DynamoDB Streams

Since Camel 2.17

Only consumer is supported

The DynamoDB Stream component supports receiving messages from Amazon DynamoDB Stream service.

Prerequisites

You must have a valid Amazon Web Services developer account, and be signed up to use Amazon DynamoDB Streams. More information are available at AWS DynamoDB

URI Format

aws-ddbstream://table-name[?options]

The stream needs to be created prior to it being used.
You can append query options to the URI in the following format, ?options=value&option2=value&…

URI Options

The AWS DynamoDB Streams component supports 13 options, which are listed below.

Name	Description	Default	Type
amazonDynamoDbStreamsClient (consumer)	Amazon DynamoDB client to use for all requests for this endpoint		AmazonDynamoDBStreams
bridgeErrorHandler (consumer)	Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions occurred while the consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored.	false	boolean
configuration (consumer)	The component configuration		DdbStreamConfiguration
iteratorType (consumer)	Defines where in the DynaboDB stream to start getting records. Note that using TRIM_HORIZON can cause a significant delay before the stream has caught up to real-time. if {AT,AFTER}_SEQUENCE_NUMBER are used, then a sequenceNumberProvider MUST be supplied. The value can be one of: TRIM_HORIZON, LATEST, AT_SEQUENCE_NUMBER, AFTER_SEQUENCE_NUMBER	LATEST	ShardIteratorType
maxResultsPerRequest (consumer)	Maximum number of records that will be fetched in each poll		int
proxyHost (consumer)	To define a proxy host when instantiating the DDBStreams client		String
proxyPort (consumer)	To define a proxy port when instantiating the DDBStreams client		Integer
proxyProtocol (consumer)	To define a proxy protocol when instantiating the DDBStreams client. The value can be one of: HTTP, HTTPS	HTTPS	Protocol
region (consumer)	The region in which DDBStreams client needs to work		String
sequenceNumberProvider (consumer)	Provider for the sequence number when using one of the two ShardIteratorType.{AT,AFTER}_SEQUENCE_NUMBER iterator types. Can be a registry reference or a literal sequence number.		SequenceNumberProvider
basicPropertyBinding (advanced)	Whether the component should use basic property binding (Camel 2.x) or the newer property binding with additional capabilities	false	boolean
accessKey (security)	Amazon AWS Access Key		String
secretKey (security)	Amazon AWS Secret Key		String

Name

Description

Default

Type

amazonDynamoDbStreamsClient (consumer)

Amazon DynamoDB client to use for all requests for this endpoint

AmazonDynamoDBStreams

bridgeErrorHandler (consumer)

Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions occurred while the consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored.

false

boolean

configuration (consumer)

The component configuration

DdbStreamConfiguration

iteratorType (consumer)

Defines where in the DynaboDB stream to start getting records. Note that using TRIM_HORIZON can cause a significant delay before the stream has caught up to real-time. if {AT,AFTER}_SEQUENCE_NUMBER are used, then a sequenceNumberProvider MUST be supplied. The value can be one of: TRIM_HORIZON, LATEST, AT_SEQUENCE_NUMBER, AFTER_SEQUENCE_NUMBER

LATEST

ShardIteratorType

maxResultsPerRequest (consumer)

Maximum number of records that will be fetched in each poll

int

proxyHost (consumer)

To define a proxy host when instantiating the DDBStreams client

String

proxyPort (consumer)

To define a proxy port when instantiating the DDBStreams client

Integer

proxyProtocol (consumer)

To define a proxy protocol when instantiating the DDBStreams client. The value can be one of: HTTP, HTTPS

HTTPS

Protocol

region (consumer)

The region in which DDBStreams client needs to work

String

sequenceNumberProvider (consumer)

Provider for the sequence number when using one of the two ShardIteratorType.{AT,AFTER}_SEQUENCE_NUMBER iterator types. Can be a registry reference or a literal sequence number.

SequenceNumberProvider

basicPropertyBinding (advanced)

Whether the component should use basic property binding (Camel 2.x) or the newer property binding with additional capabilities

false

boolean

accessKey (security)

Amazon AWS Access Key

String

secretKey (security)

Amazon AWS Secret Key

String

The AWS DynamoDB Streams endpoint is configured using URI syntax:

aws-ddbstream:tableName

with the following path and query parameters:

Path Parameters (1 parameters):

Name	Description	Default	Type
tableName	Required Name of the dynamodb table		String

Name

Description

Default

Type

tableName

Required Name of the dynamodb table

String

Query Parameters (31 parameters):

Name	Description	Default	Type
amazonDynamoDbStreamsClient (consumer)	Amazon DynamoDB client to use for all requests for this endpoint		AmazonDynamoDBStreams
bridgeErrorHandler (consumer)	Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions occurred while the consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored.	false	boolean
iteratorType (consumer)	Defines where in the DynaboDB stream to start getting records. Note that using TRIM_HORIZON can cause a significant delay before the stream has caught up to real-time. if {AT,AFTER}_SEQUENCE_NUMBER are used, then a sequenceNumberProvider MUST be supplied. The value can be one of: TRIM_HORIZON, LATEST, AT_SEQUENCE_NUMBER, AFTER_SEQUENCE_NUMBER	LATEST	ShardIteratorType
maxResultsPerRequest (consumer)	Maximum number of records that will be fetched in each poll		int
proxyHost (consumer)	To define a proxy host when instantiating the DDBStreams client		String
proxyPort (consumer)	To define a proxy port when instantiating the DDBStreams client		Integer
proxyProtocol (consumer)	To define a proxy protocol when instantiating the DDBStreams client. The value can be one of: HTTP, HTTPS	HTTPS	Protocol
region (consumer)	The region in which DDBStreams client needs to work		String
sendEmptyMessageWhenIdle (consumer)	If the polling consumer did not poll any files, you can enable this option to send an empty message (no body) instead.	false	boolean
sequenceNumberProvider (consumer)	Provider for the sequence number when using one of the two ShardIteratorType.{AT,AFTER}_SEQUENCE_NUMBER iterator types. Can be a registry reference or a literal sequence number.		SequenceNumberProvider
exceptionHandler (consumer)	To let the consumer use a custom ExceptionHandler. Notice if the option bridgeErrorHandler is enabled then this option is not in use. By default the consumer will deal with exceptions, that will be logged at WARN or ERROR level and ignored.		ExceptionHandler
exchangePattern (consumer)	Sets the exchange pattern when the consumer creates an exchange. The value can be one of: InOnly, InOut, InOptionalOut		ExchangePattern
pollStrategy (consumer)	A pluggable org.apache.camel.PollingConsumerPollingStrategy allowing you to provide your custom implementation to control error handling usually occurred during the poll operation before an Exchange have been created and being routed in Camel.		PollingConsumerPollStrategy
basicPropertyBinding (advanced)	Whether the endpoint should use basic property binding (Camel 2.x) or the newer property binding with additional capabilities	false	boolean
synchronous (advanced)	Sets whether synchronous processing should be strictly used, or Camel is allowed to use asynchronous processing (if supported).	false	boolean
backoffErrorThreshold (scheduler)	The number of subsequent error polls (failed due some error) that should happen before the backoffMultipler should kick-in.		int
backoffIdleThreshold (scheduler)	The number of subsequent idle polls that should happen before the backoffMultipler should kick-in.		int
backoffMultiplier (scheduler)	To let the scheduled polling consumer backoff if there has been a number of subsequent idles/errors in a row. The multiplier is then the number of polls that will be skipped before the next actual attempt is happening again. When this option is in use then backoffIdleThreshold and/or backoffErrorThreshold must also be configured.		int
delay (scheduler)	Milliseconds before the next poll.	500	long
greedy (scheduler)	If greedy is enabled, then the ScheduledPollConsumer will run immediately again, if the previous run polled 1 or more messages.	false	boolean
initialDelay (scheduler)	Milliseconds before the first poll starts.	1000	long
repeatCount (scheduler)	Specifies a maximum limit of number of fires. So if you set it to 1, the scheduler will only fire once. If you set it to 5, it will only fire five times. A value of zero or negative means fire forever.	0	long
runLoggingLevel (scheduler)	The consumer logs a start/complete log line when it polls. This option allows you to configure the logging level for that. The value can be one of: TRACE, DEBUG, INFO, WARN, ERROR, OFF	TRACE	LoggingLevel
scheduledExecutorService (scheduler)	Allows for configuring a custom/shared thread pool to use for the consumer. By default each consumer has its own single threaded thread pool.		ScheduledExecutorService
scheduler (scheduler)	To use a cron scheduler from either camel-spring or camel-quartz component. The value can be one of: none, spring, quartz	none	String
schedulerProperties (scheduler)	To configure additional properties when using a custom scheduler or any of the Quartz, Spring based scheduler.		Map
startScheduler (scheduler)	Whether the scheduler should be auto started.	true	boolean
timeUnit (scheduler)	Time unit for initialDelay and delay options. The value can be one of: NANOSECONDS, MICROSECONDS, MILLISECONDS, SECONDS, MINUTES, HOURS, DAYS	MILLISECONDS	TimeUnit
useFixedDelay (scheduler)	Controls if fixed delay or fixed rate is used. See ScheduledExecutorService in JDK for details.	true	boolean
accessKey (security)	Amazon AWS Access Key		String
secretKey (security)	Amazon AWS Secret Key		String

Name

Description

Default

Type

amazonDynamoDbStreamsClient (consumer)

Amazon DynamoDB client to use for all requests for this endpoint

AmazonDynamoDBStreams

bridgeErrorHandler (consumer)

false

boolean

iteratorType (consumer)

LATEST

ShardIteratorType

maxResultsPerRequest (consumer)

Maximum number of records that will be fetched in each poll

int

proxyHost (consumer)

To define a proxy host when instantiating the DDBStreams client

String

proxyPort (consumer)

To define a proxy port when instantiating the DDBStreams client

Integer

proxyProtocol (consumer)

To define a proxy protocol when instantiating the DDBStreams client. The value can be one of: HTTP, HTTPS

HTTPS

Protocol

region (consumer)

The region in which DDBStreams client needs to work

String

sendEmptyMessageWhenIdle (consumer)

If the polling consumer did not poll any files, you can enable this option to send an empty message (no body) instead.

false

boolean

sequenceNumberProvider (consumer)

Provider for the sequence number when using one of the two ShardIteratorType.{AT,AFTER}_SEQUENCE_NUMBER iterator types. Can be a registry reference or a literal sequence number.

SequenceNumberProvider

exceptionHandler (consumer)

To let the consumer use a custom ExceptionHandler. Notice if the option bridgeErrorHandler is enabled then this option is not in use. By default the consumer will deal with exceptions, that will be logged at WARN or ERROR level and ignored.

ExceptionHandler

exchangePattern (consumer)

Sets the exchange pattern when the consumer creates an exchange. The value can be one of: InOnly, InOut, InOptionalOut

ExchangePattern

pollStrategy (consumer)

A pluggable org.apache.camel.PollingConsumerPollingStrategy allowing you to provide your custom implementation to control error handling usually occurred during the poll operation before an Exchange have been created and being routed in Camel.

PollingConsumerPollStrategy

basicPropertyBinding (advanced)

Whether the endpoint should use basic property binding (Camel 2.x) or the newer property binding with additional capabilities

false

boolean

synchronous (advanced)

Sets whether synchronous processing should be strictly used, or Camel is allowed to use asynchronous processing (if supported).

false

boolean

backoffErrorThreshold (scheduler)

The number of subsequent error polls (failed due some error) that should happen before the backoffMultipler should kick-in.

int

backoffIdleThreshold (scheduler)

The number of subsequent idle polls that should happen before the backoffMultipler should kick-in.

int

backoffMultiplier (scheduler)

To let the scheduled polling consumer backoff if there has been a number of subsequent idles/errors in a row. The multiplier is then the number of polls that will be skipped before the next actual attempt is happening again. When this option is in use then backoffIdleThreshold and/or backoffErrorThreshold must also be configured.

int

delay (scheduler)

Milliseconds before the next poll.

500

long

greedy (scheduler)

If greedy is enabled, then the ScheduledPollConsumer will run immediately again, if the previous run polled 1 or more messages.

false

boolean

initialDelay (scheduler)

Milliseconds before the first poll starts.

1000

long

repeatCount (scheduler)

Specifies a maximum limit of number of fires. So if you set it to 1, the scheduler will only fire once. If you set it to 5, it will only fire five times. A value of zero or negative means fire forever.

long

runLoggingLevel (scheduler)

The consumer logs a start/complete log line when it polls. This option allows you to configure the logging level for that. The value can be one of: TRACE, DEBUG, INFO, WARN, ERROR, OFF

TRACE

LoggingLevel

scheduledExecutorService (scheduler)

Allows for configuring a custom/shared thread pool to use for the consumer. By default each consumer has its own single threaded thread pool.

ScheduledExecutorService

scheduler (scheduler)

To use a cron scheduler from either camel-spring or camel-quartz component. The value can be one of: none, spring, quartz

none

String

schedulerProperties (scheduler)

To configure additional properties when using a custom scheduler or any of the Quartz, Spring based scheduler.

Map

startScheduler (scheduler)

Whether the scheduler should be auto started.

true

boolean

timeUnit (scheduler)

Time unit for initialDelay and delay options. The value can be one of: NANOSECONDS, MICROSECONDS, MILLISECONDS, SECONDS, MINUTES, HOURS, DAYS

MILLISECONDS

TimeUnit

useFixedDelay (scheduler)

Controls if fixed delay or fixed rate is used. See ScheduledExecutorService in JDK for details.

true

boolean

accessKey (security)

Amazon AWS Access Key

String

secretKey (security)

Amazon AWS Secret Key

String

Required DynampDBStream component options

You have to provide the amazonDynamoDbStreamsClient in the Registry with proxies and relevant credentials configured.

Sequence Numbers

You can provide a literal string as the sequence number or provide a bean in the registry. An example of using the bean would be to save your current position in the change feed and restore it on Camel startup.

It is an error to provide a sequence number that is greater than the largest sequence number in the describe-streams result, as this will lead to the AWS call returning an HTTP 400.

Batch Consumer

This component implements the Batch Consumer.

This allows you for instance to know how many messages exists in this batch and for instance let the Aggregator aggregate this number of messages.

Usage

AmazonDynamoDBStreamsClient configuration

You will need to create an instance of AmazonDynamoDBStreamsClient and bind it to the registry

ClientConfiguration clientConfiguration = new ClientConfiguration();
clientConfiguration.setProxyHost("http://myProxyHost");
clientConfiguration.setProxyPort(8080);

Region region = Region.getRegion(Regions.fromName(region));
region.createClient(AmazonDynamoDBStreamsClient.class, null, clientConfiguration);
// the 'null' here is the AWSCredentialsProvider which defaults to an instance of DefaultAWSCredentialsProviderChain

registry.bind("kinesisClient", client);

Providing AWS Credentials

It is recommended that the credentials are obtained by using the DefaultAWSCredentialsProviderChain that is the default when creating a new ClientConfiguration instance, however, a different AWSCredentialsProvider can be specified when calling createClient(…).

Coping with Downtime

AWS DynamoDB Streams outage of less than 24 hours

The consumer will resume from the last seen sequence number (as implemented for CAMEL-9515), so you should receive a flood of events in quick succession, as long as the outage did not also include DynamoDB itself.

AWS DynamoDB Streams outage of more than 24 hours

Given that AWS only retain 24 hours worth of changes, you will have missed change events no matter what mitigations are in place.

Automatic detection of AmazonDynamoDBStreams client in registry

The component is capable of detecting the presence of an AmazonDynamoDBStreams bean into the registry. If it’s the only instance of that type it will be used as client and you won’t have to define it as uri parameter. This may be really useful for smarter configuration of the endpoint.

Dependencies

Maven users will need to add the following dependency to their pom.xml.

pom.xml

<dependency>
    <groupId>org.apache.camel</groupId>
    <artifactId>camel-aws</artifactId>
    <version>${camel-version}</version>
</dependency>

where ${camel-version} must be replaced by the actual version of Camel.

Spring Boot Auto-Configuration

When using aws-ddb with Spring Boot make sure to use the following Maven dependency to have support for auto configuration:

<dependency>
  <groupId>org.apache.camel.springboot</groupId>
  <artifactId>camel-aws-ddb-starter</artifactId>
  <version>x.x.x</version>
  <!-- use the same version as your Camel core version -->
</dependency>

The component supports 33 options, which are listed below.

Name	Description	Default	Type
camel.component.aws-ddb.access-key	Amazon AWS Access Key		String
camel.component.aws-ddb.amazon-d-d-b-client	To use the AmazonDynamoDB as the client. The option is a com.amazonaws.services.dynamodbv2.AmazonDynamoDB type.		String
camel.component.aws-ddb.auto-discover-client	Setting the autoDiscoverClient mechanism, if true, the component will look for a client instance in the registry automatically otherwise it will skip that checking.	true	Boolean
camel.component.aws-ddb.basic-property-binding	Whether the component should use basic property binding (Camel 2.x) or the newer property binding with additional capabilities	false	Boolean
camel.component.aws-ddb.configuration	The component configuration. The option is a org.apache.camel.component.aws.ddb.DdbConfiguration type.		String
camel.component.aws-ddb.consistent-read	Determines whether or not strong consistency should be enforced when data is read.	false	Boolean
camel.component.aws-ddb.enabled	Whether to enable auto configuration of the aws-ddb component. This is enabled by default.		Boolean
camel.component.aws-ddb.key-attribute-name	Attribute name when creating table		String
camel.component.aws-ddb.key-attribute-type	Attribute type when creating table		String
camel.component.aws-ddb.lazy-start-producer	Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.	false	Boolean
camel.component.aws-ddb.operation	What operation to perform		DdbOperations
camel.component.aws-ddb.proxy-host	To define a proxy host when instantiating the DDB client		String
camel.component.aws-ddb.proxy-port	To define a proxy port when instantiating the DDB client. When using this parameter, the configuration will expect the capitalized name of the region (for example AP_EAST_1) You’ll need to use the name Regions.EU_WEST_1.name()		Integer
camel.component.aws-ddb.proxy-protocol	To define a proxy protocol when instantiating the DDB client		Protocol
camel.component.aws-ddb.read-capacity	The provisioned throughput to reserve for reading resources from your table		Long
camel.component.aws-ddb.region	The region in which DDB client needs to work		String
camel.component.aws-ddb.secret-key	Amazon AWS Secret Key		String
camel.component.aws-ddb.write-capacity	The provisioned throughput to reserved for writing resources to your table		Long
camel.component.aws-ddbstream.access-key	Amazon AWS Access Key		String
camel.component.aws-ddbstream.amazon-dynamo-db-streams-client	Amazon DynamoDB client to use for all requests for this endpoint. The option is a com.amazonaws.services.dynamodbv2.AmazonDynamoDBStreams type.		String
camel.component.aws-ddbstream.auto-discover-client	Setting the autoDiscoverClient mechanism, if true, the component will look for a client instance in the registry automatically otherwise it will skip that checking	true	Boolean
camel.component.aws-ddbstream.basic-property-binding	Whether the component should use basic property binding (Camel 2.x) or the newer property binding with additional capabilities	false	Boolean
camel.component.aws-ddbstream.bridge-error-handler	Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions occurred while the consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored.	false	Boolean
camel.component.aws-ddbstream.configuration	The component configuration. The option is a org.apache.camel.component.aws.ddbstream.DdbStreamConfiguration type.		String
camel.component.aws-ddbstream.enabled	Whether to enable auto configuration of the aws-ddbstream component. This is enabled by default.		Boolean
camel.component.aws-ddbstream.iterator-type	Defines where in the DynaboDB stream to start getting records. Note that using TRIM_HORIZON can cause a significant delay before the stream has caught up to real-time. if {AT,AFTER}_SEQUENCE_NUMBER are used, then a sequenceNumberProvider MUST be supplied.		ShardIteratorType
camel.component.aws-ddbstream.max-results-per-request	Maximum number of records that will be fetched in each poll		Integer
camel.component.aws-ddbstream.proxy-host	To define a proxy host when instantiating the DDBStreams client		String
camel.component.aws-ddbstream.proxy-port	To define a proxy port when instantiating the DDBStreams client		Integer
camel.component.aws-ddbstream.proxy-protocol	To define a proxy protocol when instantiating the DDBStreams client		Protocol
camel.component.aws-ddbstream.region	The region in which DDBStreams client needs to work		String
camel.component.aws-ddbstream.secret-key	Amazon AWS Secret Key		String
camel.component.aws-ddbstream.sequence-number-provider	Provider for the sequence number when using one of the two ShardIteratorType.{AT,AFTER}_SEQUENCE_NUMBER iterator types. Can be a registry reference or a literal sequence number. The option is a org.apache.camel.component.aws.ddbstream.SequenceNumberProvider type.		String

Name

Description

Default

Type

camel.component.aws-ddb.access-key

Amazon AWS Access Key

String

camel.component.aws-ddb.amazon-d-d-b-client

To use the AmazonDynamoDB as the client. The option is a com.amazonaws.services.dynamodbv2.AmazonDynamoDB type.

String

camel.component.aws-ddb.auto-discover-client

Setting the autoDiscoverClient mechanism, if true, the component will look for a client instance in the registry automatically otherwise it will skip that checking.

true

Boolean

camel.component.aws-ddb.basic-property-binding

Whether the component should use basic property binding (Camel 2.x) or the newer property binding with additional capabilities

false

Boolean

camel.component.aws-ddb.configuration

The component configuration. The option is a org.apache.camel.component.aws.ddb.DdbConfiguration type.

String

camel.component.aws-ddb.consistent-read

Determines whether or not strong consistency should be enforced when data is read.

false

Boolean

camel.component.aws-ddb.enabled

Whether to enable auto configuration of the aws-ddb component. This is enabled by default.

Boolean

camel.component.aws-ddb.key-attribute-name

Attribute name when creating table

String

camel.component.aws-ddb.key-attribute-type

Attribute type when creating table

String

camel.component.aws-ddb.lazy-start-producer

Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.

false

Boolean

camel.component.aws-ddb.operation

What operation to perform

DdbOperations

camel.component.aws-ddb.proxy-host

To define a proxy host when instantiating the DDB client

String

camel.component.aws-ddb.proxy-port

To define a proxy port when instantiating the DDB client. When using this parameter, the configuration will expect the capitalized name of the region (for example AP_EAST_1) You’ll need to use the name Regions.EU_WEST_1.name()

Integer

camel.component.aws-ddb.proxy-protocol

To define a proxy protocol when instantiating the DDB client

Protocol

camel.component.aws-ddb.read-capacity

The provisioned throughput to reserve for reading resources from your table

Long

camel.component.aws-ddb.region

The region in which DDB client needs to work

String

camel.component.aws-ddb.secret-key

Amazon AWS Secret Key

String

camel.component.aws-ddb.write-capacity

The provisioned throughput to reserved for writing resources to your table

Long

camel.component.aws-ddbstream.access-key

Amazon AWS Access Key

String

camel.component.aws-ddbstream.amazon-dynamo-db-streams-client

Amazon DynamoDB client to use for all requests for this endpoint. The option is a com.amazonaws.services.dynamodbv2.AmazonDynamoDBStreams type.

String

camel.component.aws-ddbstream.auto-discover-client

Setting the autoDiscoverClient mechanism, if true, the component will look for a client instance in the registry automatically otherwise it will skip that checking

true

Boolean

camel.component.aws-ddbstream.basic-property-binding

Whether the component should use basic property binding (Camel 2.x) or the newer property binding with additional capabilities

false

Boolean

camel.component.aws-ddbstream.bridge-error-handler

false

Boolean

camel.component.aws-ddbstream.configuration

The component configuration. The option is a org.apache.camel.component.aws.ddbstream.DdbStreamConfiguration type.

String

camel.component.aws-ddbstream.enabled

Whether to enable auto configuration of the aws-ddbstream component. This is enabled by default.

Boolean

camel.component.aws-ddbstream.iterator-type

ShardIteratorType

camel.component.aws-ddbstream.max-results-per-request

Maximum number of records that will be fetched in each poll

Integer

camel.component.aws-ddbstream.proxy-host

To define a proxy host when instantiating the DDBStreams client

String

camel.component.aws-ddbstream.proxy-port

To define a proxy port when instantiating the DDBStreams client

Integer

camel.component.aws-ddbstream.proxy-protocol

To define a proxy protocol when instantiating the DDBStreams client

Protocol

camel.component.aws-ddbstream.region

The region in which DDBStreams client needs to work

String

camel.component.aws-ddbstream.secret-key

Amazon AWS Secret Key

String

camel.component.aws-ddbstream.sequence-number-provider

Provider for the sequence number when using one of the two ShardIteratorType.{AT,AFTER}_SEQUENCE_NUMBER iterator types. Can be a registry reference or a literal sequence number. The option is a org.apache.camel.component.aws.ddbstream.SequenceNumberProvider type.

String