camel-snmp-kafka-connector source configuration

When using camel-snmp-kafka-connector as source make sure to use the following Maven dependency to have support for the connector:

<dependency>
  <groupId>org.apache.camel.kafkaconnector</groupId>
  <artifactId>camel-snmp-kafka-connector</artifactId>
  <version>x.x.x</version>
  <!-- use the same version as your Camel Kafka connector version -->
</dependency>

The camel-snmp source connector supports 41 options, which are listed below.

Name	Description	Default	Priority
camel.source.path.host	Hostname of the SNMP enabled device	null	HIGH
camel.source.path.port	Port number of the SNMP enabled device	null	HIGH
camel.source.endpoint.oids	Defines which values you are interested in. Please have a look at the Wikipedia to get a better understanding. You may provide a single OID or a coma separated list of OIDs. Example: oids=1.3.6.1.2.1.1.3.0,1.3.6.1.2.1.25.3.2.1.5.1,1.3.6.1.2.1.25.3.5.1.1.1,1.3.6.1.2.1.43.5.1.1.11.1	null	MEDIUM
camel.source.endpoint.protocol	Here you can select which protocol to use. You can use either udp or tcp. One of: [tcp] [udp]	"udp"	MEDIUM
camel.source.endpoint.retries	Defines how often a retry is made before canceling the request.	2	MEDIUM
camel.source.endpoint.snmpCommunity	Sets the community octet string for the snmp request.	"public"	MEDIUM
camel.source.endpoint.snmpContextEngineId	Sets the context engine ID field of the scoped PDU.	null	MEDIUM
camel.source.endpoint.snmpContextName	Sets the context name field of this scoped PDU.	null	MEDIUM
camel.source.endpoint.snmpVersion	Sets the snmp version for the request. The value 0 means SNMPv1, 1 means SNMPv2c, and the value 3 means SNMPv3 One of: [0] [1] [3]	0	MEDIUM
camel.source.endpoint.timeout	Sets the timeout value for the request in millis.	1500	MEDIUM
camel.source.endpoint.type	Which operation to perform such as poll, trap, etc. One of: [TRAP] [POLL] [GET_NEXT]	null	MEDIUM
camel.source.endpoint.bridgeErrorHandler	Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions occurred while the consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored.	false	MEDIUM
camel.source.endpoint.delay	Sets update rate in seconds	60000L	MEDIUM
camel.source.endpoint.sendEmptyMessageWhenIdle	If the polling consumer did not poll any files, you can enable this option to send an empty message (no body) instead.	false	MEDIUM
camel.source.endpoint.treeList	Sets the flag whether the scoped PDU will be displayed as the list if it has child elements in its tree	false	MEDIUM
camel.source.endpoint.exceptionHandler	To let the consumer use a custom ExceptionHandler. Notice if the option bridgeErrorHandler is enabled then this option is not in use. By default the consumer will deal with exceptions, that will be logged at WARN or ERROR level and ignored.	null	MEDIUM
camel.source.endpoint.exchangePattern	Sets the exchange pattern when the consumer creates an exchange. One of: [InOnly] [InOut] [InOptionalOut]	null	MEDIUM
camel.source.endpoint.pollStrategy	A pluggable org.apache.camel.PollingConsumerPollingStrategy allowing you to provide your custom implementation to control error handling usually occurred during the poll operation before an Exchange have been created and being routed in Camel.	null	MEDIUM
camel.source.endpoint.basicPropertyBinding	Whether the endpoint should use basic property binding (Camel 2.x) or the newer property binding with additional capabilities	false	MEDIUM
camel.source.endpoint.synchronous	Sets whether synchronous processing should be strictly used, or Camel is allowed to use asynchronous processing (if supported).	false	MEDIUM
camel.source.endpoint.backoffErrorThreshold	The number of subsequent error polls (failed due some error) that should happen before the backoffMultipler should kick-in.	null	MEDIUM
camel.source.endpoint.backoffIdleThreshold	The number of subsequent idle polls that should happen before the backoffMultipler should kick-in.	null	MEDIUM
camel.source.endpoint.backoffMultiplier	To let the scheduled polling consumer backoff if there has been a number of subsequent idles/errors in a row. The multiplier is then the number of polls that will be skipped before the next actual attempt is happening again. When this option is in use then backoffIdleThreshold and/or backoffErrorThreshold must also be configured.	null	MEDIUM
camel.source.endpoint.greedy	If greedy is enabled, then the ScheduledPollConsumer will run immediately again, if the previous run polled 1 or more messages.	false	MEDIUM
camel.source.endpoint.initialDelay	Milliseconds before the first poll starts.	1000L	MEDIUM
camel.source.endpoint.repeatCount	Specifies a maximum limit of number of fires. So if you set it to 1, the scheduler will only fire once. If you set it to 5, it will only fire five times. A value of zero or negative means fire forever.	0L	MEDIUM
camel.source.endpoint.runLoggingLevel	The consumer logs a start/complete log line when it polls. This option allows you to configure the logging level for that. One of: [TRACE] [DEBUG] [INFO] [WARN] [ERROR] [OFF]	"TRACE"	MEDIUM
camel.source.endpoint.scheduledExecutorService	Allows for configuring a custom/shared thread pool to use for the consumer. By default each consumer has its own single threaded thread pool.	null	MEDIUM
camel.source.endpoint.scheduler	To use a cron scheduler from either camel-spring or camel-quartz component One of: [none] [spring] [quartz]	"none"	MEDIUM
camel.source.endpoint.schedulerProperties	To configure additional properties when using a custom scheduler or any of the Quartz, Spring based scheduler.	null	MEDIUM
camel.source.endpoint.startScheduler	Whether the scheduler should be auto started.	true	MEDIUM
camel.source.endpoint.timeUnit	Time unit for initialDelay and delay options. One of: [NANOSECONDS] [MICROSECONDS] [MILLISECONDS] [SECONDS] [MINUTES] [HOURS] [DAYS]	"MILLISECONDS"	MEDIUM
camel.source.endpoint.useFixedDelay	Controls if fixed delay or fixed rate is used. See ScheduledExecutorService in JDK for details.	true	MEDIUM
camel.source.endpoint.authenticationPassphrase	The authentication passphrase. If not null, authenticationProtocol must also be not null. RFC3414 11.2 requires passphrases to have a minimum length of 8 bytes. If the length of authenticationPassphrase is less than 8 bytes an IllegalArgumentException is thrown.	null	MEDIUM
camel.source.endpoint.authenticationProtocol	Authentication protocol to use if security level is set to enable authentication The possible values are: MD5, SHA1 One of: [MD5] [SHA1]	null	MEDIUM
camel.source.endpoint.privacyPassphrase	The privacy passphrase. If not null, privacyProtocol must also be not null. RFC3414 11.2 requires passphrases to have a minimum length of 8 bytes. If the length of authenticationPassphrase is less than 8 bytes an IllegalArgumentException is thrown.	null	MEDIUM
camel.source.endpoint.privacyProtocol	The privacy protocol ID to be associated with this user. If set to null, this user only supports unencrypted messages.	null	MEDIUM
camel.source.endpoint.securityLevel	Sets the security level for this target. The supplied security level must be supported by the security model dependent information associated with the security name set for this target. The value 1 means: No authentication and no encryption. Anyone can create and read messages with this security level The value 2 means: Authentication and no encryption. Only the one with the right authentication key can create messages with this security level, but anyone can read the contents of the message. The value 3 means: Authentication and encryption. Only the one with the right authentication key can create messages with this security level, and only the one with the right encryption/decryption key can read the contents of the message. One of: [1] [2] [3]	3	MEDIUM
camel.source.endpoint.securityName	Sets the security name to be used with this target.	null	MEDIUM
camel.component.snmp.bridgeErrorHandler	Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions occurred while the consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored.	false	MEDIUM
camel.component.snmp.basicPropertyBinding	Whether the component should use basic property binding (Camel 2.x) or the newer property binding with additional capabilities	false	MEDIUM

Name

Description

Default

Priority

camel.source.path.host

Hostname of the SNMP enabled device

null

HIGH

camel.source.path.port

Port number of the SNMP enabled device

null

HIGH

camel.source.endpoint.oids

Defines which values you are interested in. Please have a look at the Wikipedia to get a better understanding. You may provide a single OID or a coma separated list of OIDs. Example: oids=1.3.6.1.2.1.1.3.0,1.3.6.1.2.1.25.3.2.1.5.1,1.3.6.1.2.1.25.3.5.1.1.1,1.3.6.1.2.1.43.5.1.1.11.1

null

MEDIUM

camel.source.endpoint.protocol

Here you can select which protocol to use. You can use either udp or tcp. One of: [tcp] [udp]

"udp"

MEDIUM

camel.source.endpoint.retries

Defines how often a retry is made before canceling the request.

MEDIUM

camel.source.endpoint.snmpCommunity

Sets the community octet string for the snmp request.

"public"

MEDIUM

camel.source.endpoint.snmpContextEngineId

Sets the context engine ID field of the scoped PDU.

null

MEDIUM

camel.source.endpoint.snmpContextName

Sets the context name field of this scoped PDU.

null

MEDIUM

camel.source.endpoint.snmpVersion

Sets the snmp version for the request. The value 0 means SNMPv1, 1 means SNMPv2c, and the value 3 means SNMPv3 One of: [0] [1] [3]

MEDIUM

camel.source.endpoint.timeout

Sets the timeout value for the request in millis.

1500

MEDIUM

camel.source.endpoint.type

Which operation to perform such as poll, trap, etc. One of: [TRAP] [POLL] [GET_NEXT]

null

MEDIUM

camel.source.endpoint.bridgeErrorHandler

Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions occurred while the consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored.

false

MEDIUM

camel.source.endpoint.delay

Sets update rate in seconds

60000L

MEDIUM

camel.source.endpoint.sendEmptyMessageWhenIdle

If the polling consumer did not poll any files, you can enable this option to send an empty message (no body) instead.

false

MEDIUM

camel.source.endpoint.treeList

Sets the flag whether the scoped PDU will be displayed as the list if it has child elements in its tree

false

MEDIUM

camel.source.endpoint.exceptionHandler

To let the consumer use a custom ExceptionHandler. Notice if the option bridgeErrorHandler is enabled then this option is not in use. By default the consumer will deal with exceptions, that will be logged at WARN or ERROR level and ignored.

null

MEDIUM

camel.source.endpoint.exchangePattern

Sets the exchange pattern when the consumer creates an exchange. One of: [InOnly] [InOut] [InOptionalOut]

null

MEDIUM

camel.source.endpoint.pollStrategy

A pluggable org.apache.camel.PollingConsumerPollingStrategy allowing you to provide your custom implementation to control error handling usually occurred during the poll operation before an Exchange have been created and being routed in Camel.

null

MEDIUM

camel.source.endpoint.basicPropertyBinding

Whether the endpoint should use basic property binding (Camel 2.x) or the newer property binding with additional capabilities

false

MEDIUM

camel.source.endpoint.synchronous

Sets whether synchronous processing should be strictly used, or Camel is allowed to use asynchronous processing (if supported).

false

MEDIUM

camel.source.endpoint.backoffErrorThreshold

The number of subsequent error polls (failed due some error) that should happen before the backoffMultipler should kick-in.

null

MEDIUM

camel.source.endpoint.backoffIdleThreshold

The number of subsequent idle polls that should happen before the backoffMultipler should kick-in.

null

MEDIUM

camel.source.endpoint.backoffMultiplier

To let the scheduled polling consumer backoff if there has been a number of subsequent idles/errors in a row. The multiplier is then the number of polls that will be skipped before the next actual attempt is happening again. When this option is in use then backoffIdleThreshold and/or backoffErrorThreshold must also be configured.

null

MEDIUM

camel.source.endpoint.greedy

If greedy is enabled, then the ScheduledPollConsumer will run immediately again, if the previous run polled 1 or more messages.

false

MEDIUM

camel.source.endpoint.initialDelay

Milliseconds before the first poll starts.

1000L

MEDIUM

camel.source.endpoint.repeatCount

Specifies a maximum limit of number of fires. So if you set it to 1, the scheduler will only fire once. If you set it to 5, it will only fire five times. A value of zero or negative means fire forever.

MEDIUM

camel.source.endpoint.runLoggingLevel

The consumer logs a start/complete log line when it polls. This option allows you to configure the logging level for that. One of: [TRACE] [DEBUG] [INFO] [WARN] [ERROR] [OFF]

"TRACE"

MEDIUM

camel.source.endpoint.scheduledExecutorService

Allows for configuring a custom/shared thread pool to use for the consumer. By default each consumer has its own single threaded thread pool.

null

MEDIUM

camel.source.endpoint.scheduler

To use a cron scheduler from either camel-spring or camel-quartz component One of: [none] [spring] [quartz]

"none"

MEDIUM

camel.source.endpoint.schedulerProperties

To configure additional properties when using a custom scheduler or any of the Quartz, Spring based scheduler.

null

MEDIUM

camel.source.endpoint.startScheduler

Whether the scheduler should be auto started.

true

MEDIUM

camel.source.endpoint.timeUnit

Time unit for initialDelay and delay options. One of: [NANOSECONDS] [MICROSECONDS] [MILLISECONDS] [SECONDS] [MINUTES] [HOURS] [DAYS]

"MILLISECONDS"

MEDIUM

camel.source.endpoint.useFixedDelay

Controls if fixed delay or fixed rate is used. See ScheduledExecutorService in JDK for details.

true

MEDIUM

camel.source.endpoint.authenticationPassphrase

The authentication passphrase. If not null, authenticationProtocol must also be not null. RFC3414 11.2 requires passphrases to have a minimum length of 8 bytes. If the length of authenticationPassphrase is less than 8 bytes an IllegalArgumentException is thrown.

null

MEDIUM

camel.source.endpoint.authenticationProtocol

Authentication protocol to use if security level is set to enable authentication The possible values are: MD5, SHA1 One of: [MD5] [SHA1]

null

MEDIUM

camel.source.endpoint.privacyPassphrase

The privacy passphrase. If not null, privacyProtocol must also be not null. RFC3414 11.2 requires passphrases to have a minimum length of 8 bytes. If the length of authenticationPassphrase is less than 8 bytes an IllegalArgumentException is thrown.

null

MEDIUM

camel.source.endpoint.privacyProtocol

The privacy protocol ID to be associated with this user. If set to null, this user only supports unencrypted messages.

null

MEDIUM

camel.source.endpoint.securityLevel

Sets the security level for this target. The supplied security level must be supported by the security model dependent information associated with the security name set for this target. The value 1 means: No authentication and no encryption. Anyone can create and read messages with this security level The value 2 means: Authentication and no encryption. Only the one with the right authentication key can create messages with this security level, but anyone can read the contents of the message. The value 3 means: Authentication and encryption. Only the one with the right authentication key can create messages with this security level, and only the one with the right encryption/decryption key can read the contents of the message. One of: [1] [2] [3]

MEDIUM

camel.source.endpoint.securityName

Sets the security name to be used with this target.

null

MEDIUM

camel.component.snmp.bridgeErrorHandler

false

MEDIUM

camel.component.snmp.basicPropertyBinding

Whether the component should use basic property binding (Camel 2.x) or the newer property binding with additional capabilities

false

MEDIUM